Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Is there a way to set the (RADIUS)Service-Type by the device you are logginginto?For Example, If User1 telnets to 10.10.10.1 he gets Service-Type=AdministrativeIf User2 telnets to 10.10.10.1 he gets Service-Type=NAS PromptNote: I understand that...
Hi, I am trying to find a solution, for the following design,We have over 250 Nortel Switches(Baystack 460).Authetication works fine with ACS 3.2 Using Radius.Now I want to do the following,* I have 2 ADMIN groupsADMINGP1: To manage 100 Switches wit...
Hi, Could someone help me out on the following scenario,Equipments,Routers: Cisco (TACACS)Switches: Nortel (RADIUS)ACS Server: Cisco ACS 3.2I am trying to do the following,2 Network Devices groupsGroupA: Contains 10 routers and 10 SwitchesGroupB: 50...
Hi, I am trying out the following Multicast design and doesn't seem to be working...here goes,HO(router)---WAN---Site(router)----LAN---(L3 Nortel 1200 XLR)Router-Cisco L3 Switch--Nortel AccelarProblem:I have implemented IP PIM on all our WAN and LA...
Hi, Would greatly apprecaite if any feedback is provided if the following scenario is workable,Switches: EAPOL capableRadius server : ACS 3.2Requirement: When a user logs into the network, the users is assigned to a temporary VLAN, in whic...
Hi, Nope, no updates.But the possible solution to this would be,* To groups the RADIUS Devices i.e Network Devices group (Which is possible in ACS)* Apply RADIUS attributes on the User groups based on the NDG.(Which I understand is not possible in A...
Hi Steve, I tried the command "ip dvmrp use-11.4", but still no luck.The Nortel box is not recieving any group info from router OR the case maybe that the Nortel is recieving groups and is not accepting the same.Anyways next step is to run d...
