About FabriceLaman

FabriceLaman · 12-14-2021

Hi all,I upgraded NCS5501-SE from 6.6.3 to 7.1.2, upgrade went smooth, but after upgrading fpd, i this message telling to reload. RP/0/RP0/CPU0:RT#sh hw-module fpdTue Dec 14 14:15:22.672 UTCFPD Versions=================Location Card type HWver FPD de...

FabriceLaman · 12-14-2021

Hi all,I upgraded NCS5501-SE from 6.6.3 to 7.1.2, upgrade went smooth, but after upgrading fpd, i this message telling to reload. RP/0/RP0/CPU0:RT#sh hw-module fpdTue Dec 14 14:15:22.672 UTCFPD Versions=================Location Card type HWver FPD de...

FabriceLaman · 04-11-2022

Hi Pau.NadeuFor the issue with *CPUIOFPGA*, I had no solution, even with the Cisco TACSupport, which asked me to make an RMA.Also when you upgrade or downgrade on IOS XR, you have to give the routertime to upgrade or downgrade the line cards as it do...

FabriceLaman · 04-10-2022

Hi,I see that you use baudrate set to *1152200*... use *115200 *to connect tothe console.Best regards,Fabrice LAMAN

FabriceLaman · 12-21-2021

Hi @ tkarnani,cannot access the CLI, and the USB boot don't work. Thank.

Member Since	‎12-14-2021 07:39 AM
Date Last Visited	‎02-22-2023 12:01 AM
Posts	5
Total Helpful Votes Received	10

User Statistics

User Activity

NCS 5501-SE reboot after upgrade from 6.6.3 to 7.1.2

NCS 5501-SE reboot after upgrade from 6.6.3 to 7.1.2

Re: NCS 5501-SE reboot after upgrade from 6.6.3 to 7.1.2

Re: NCS 5501-SE reboot after upgrade from 6.6.3 to 7.1.2

Re: NCS 5501-SE reboot after upgrade from 6.6.3 to 7.1.2