Hi,When i am trying to tracert one of the Router in LAN, It who "maximum of 30 hops" but in result it show 2 hops?Please suggest is it routing loop? S:\>tracert 150.100.20.100Tracing route to 10.10.1.1 over a maximum of 30 hops 1 31 ms <1 ms ...
Hi,I want to configure SNMP on cisco Switches 2960/3750 to get switches detail like UP/Down, overload, performance. I need configuration steps for it.Amin
Hi,i wan to configure DHCP Pool on Catalyst 2960 Switch. Can we configure it as DHCP Server so it assign IPs on LAN?I Saw configuration in which it define Pool but with this they define some Snooping? Why Snopping?Thankx.Amin
Hi,Thanks or your prompt reply. Bu what about SNMP cumunity String? We have to define same community string in our Whatsup Gold monitoring software?Amin
Hi,We are using WhatsUp gold and solarwind monitoring software for it and we want to see that how these softwares display SNMP data from Switches.What i undestand from the data sheet for SNMP we need to define following command to run SNMP properly o...
Hi,What about the SNMP Manager? Who will be manager and who will be client? And there are some user groups also?Thanks with Best Regards, Jehan Zaib Amin Network Engineer Tel : + 966 3 340 7536 Cell : + 966 54 6927848 Fax : + 966 3 340 7537 e...
Hi All,I get configured 2960 as DHCP server with required subnet and working correctly on LAN. I have the following configuration:ip dhcp pool TEST network 150.100.4.0 255.255.252.0 domain-name xyz.com default-router 150.100.4.1 dns-server 1...
Hi,but normally this feature is from the IP PH. like linksys IP 922,942 have feature to set the password on IP PH from setting /set/password.if we upgrade the IOS for IP PH then we can get this feature?Amin
