Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 6 AP's with G radios and would like to maximize # of users due to density issues. I configured 2 SSID's with 3 different channels on 3 AP's (1,6,11). (2 sets of these for 6 total).Using indoor wall patch antennas.Right now I am using DHCP to a...
Hi All, We installed CW2000 VMS 2.1 and set our PIX's & 3000's to log their syslog messager to the CW2000 server. We see about 1000 invalid messages a day and we are wondering what are they and how can we see these invalid messages???ROY
Hello, We would ike to manage multiple VPN concentrators using VMS 2.1. We have RME working and VPN Monitor and that is it.Can we do something in CSPM or Management Center for the concentrators or are these products only for routers, PIX or IDS?FYI -...
Is there any thing needed to activate a tunnel ussing 3DES between a Cisco PIX 501-50 & a CIsco 3640 with IPSEC (3DES) IOS 12.1.18? When configured for DES it works but 3DES does not.and yes I changed the transform sets and Isakmp policies on the ro...
Correct I assigned one DHCP scope per SSID which sits in their own VLAN (ie. 2 scopes across all 6 AP's using the 2 SSIDs). This works fine.The issue was when roaming the W-NIC would drop when going from 1 AP to another, since the IP would go to 0.0....
You can use separate VLANs and then use a policy map statement pointing to the next hop router to force traffic where you would like it to go on the guest VLAN.
