About cedricm73

cedricm73 · 03-27-2009

Hi, i get the request to change the display name on cisco IP Phone. they want to get the name of the caller display on the screen only for a closed list of cell number.do you have any clue where to start ?

cedricm73 · 02-04-2009

Hi, i have an issue with a MGCP Gateway configuration (2851/IOS 12.4-23) connected to a CUCM 6.1.2.when i dial a number, as soon as the number match a unique route pattern, the call is send over the E1 and the operator send back an error as the numbe...

cedricm73 · 11-22-2007

Hi, i have a cisco 3745 ISO 12.4(17a) with 2 VWIC-1MFT-G703 in slot 0 and NM-HDV2-2T1/E1 in slot 1. i can see the 2 G703 E1 controller but i can not setup the 2 E1 on the NM-HDV2-2T1/E1. on the sh diag i can see Slot 1: High Density Voice NM-H...

cedricm73 · 11-15-2007

Hi,i have issue to get isdn overlap receiving on a mgcp gateway cisco 3825 12.4(13r)T connected to a CCM 4.1.3sr4disdn overlap receiving is set on serial interface and Overlap Receiving Flag for PRI* is set to true on CCM. T302 time is currently set ...

cedricm73 · 04-02-2009

Hi, i have exactly the same request, but i get a site which using a H323 gateway and get it working before.it's look like it can be done using a TCL script on the flash of the router. but i have no way to test it. so i share it with you, if someone h...

cedricm73 · 03-24-2009

Hi, does your Switch have 2 power input and does the 2 power input are connected to a UPS. What could happen is that if one of your power input was on Direct current and the other one on UPS, when the power went down, the switch doesn't have enough p...

cedricm73 · 02-04-2009

thanks all for your advice. i confirm that recreating all route pattern from scratch solve my issue.

cedricm73 · 02-04-2009

yes, i am removing the predot before sending to the gateway (Called Party Transformations on route pattern). The issue look like really link to the fact that as soon as the number dial match 1 pattern, CUCM release to gateway without waiting the extr...

cedricm73 · 02-04-2009

Hi, first thanks for your quick feedback. i have double check the route pattern and don't see any overlap. in fact 9.00 was an example, all route pattern that goes to this Operator have the issue.Phone have CSS that contain only IT-MIL-PSTNand routep...

Member Since	‎02-27-2007 06:51 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	21
Total Helpful Votes Received	4

User Statistics

User Activity

Display name for incomming Call

E1 - MGCP Gateway : call push to operator before user finished to dial

cisco 3745 and NM-HDV2-2T1/E1

isdn overlap receiving on MGCP gateway and CCM 4.1.3sr4d

Re: Caller ID from local directory for PSTN callers?

Re: PoE Phone Issue

Re: E1 - MGCP Gateway : call push to operator before user finish

Re: E1 - MGCP Gateway : call push to operator before user finish

Re: E1 - MGCP Gateway : call push to operator before user finish