About gal.avichid

gal.avichid · 01-29-2024

Hi,I have 2 environment with in separate rooms with the same subnet 10.10.10.0/24each environment connected to aenv1-switch, this sw connected to cisco asa1(192.168.14.2) connected to myciscoasa(192.168.14.1)env-2switch, this sw connected to cisco as...

gal.avichid · 12-22-2023

Hi,Facing some speed\connectivity issues with my RA-VPN. After reading a lot, and tried few things, I still can't enable the DTLS.Running Cisco 1010 and manage via FDM.In the group policy of the VPN, I have enabled DTLS, but still when connecting, th...

gal.avichid · 11-13-2023

Hi, We had in our topology, 12 Cisco ASA 5506 connected S2S via 1x ASA 5506 HUB, which have had all the tunnel set there. Last week we have upgraded to HUB to FPR-1010. I am struggling with setting up the connectivity between to spoken ones. Current ...

gal.avichid · 11-12-2023

HiRunning ASA 9.8.2, on ASA 5506. Created S2S VPN to Cisco 1010.Getting this error when trying to communicate.Same 1010 is connected to another 2x ASA 5506, all works well.Compared 1000 time the configs between the working one and the faulty one.I ha...

gal.avichid · 07-24-2023

Hi,I have a Cisco ASA 5506-X, and i would like to use the management port as a regular port, when trying to change its settings, i get an error:I guess i need a different license?if so, which one? I can't find the specific license name, also with my ...

gal.avichid · 01-31-2024

what is the difference between mapped object and real object?is the NAT rule need to be on the ciscoasa or MYCISCOASA?Thanks

gal.avichid · 01-31-2024

unfortunately its a HPE switches

gal.avichid · 01-30-2024

HiI can't find VRF, my ASA 5506 is without any special license, so I can't believe I have this option.I have tried set the NAT, but I guess i forgot something:ciscoasa(config)# object network obj-10.10.10.0ciscoasa(config-network-object)# subnet 10.1...

gal.avichid · 01-30-2024

Can you give some more info about the principal with the NAT?

gal.avichid · 01-29-2024

Hope you can understand what i meant let me know if need more infoeventually ill need to allow communication between the 10.10.10.0/24 network to the other network in the squared color.but not allow communication between computers in the green squar...

Member Since	‎01-02-2022 08:19 AM
Date Last Visited	‎01-31-2024 12:13 AM
Posts	56
Total Helpful Votes Received	15

User Statistics

User Activity

Setting up route for 2 networks with the same ip address

Enable DTLSv1.2

Allow Communications Between Multi S2S

IKEv2 Negotiation aborted due to ERROR: Detected unsupported failover

Change management port to work as regular interface

Re: Setting up route for 2 networks with the same ip address

Re: Setting up route for 2 networks with the same ip address

Re: Setting up route for 2 networks with the same ip address

Re: Setting up route for 2 networks with the same ip address

Re: Setting up route for 2 networks with the same ip address