Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Gentlemen, I need a little help or a push....I've researched and researched, but I haven't been able to figure out how to make it work. I currently have a connection between Site A and Site B. It's a point-to-point connection on Gi0/0/0 (both sides) ...
Hi Guys,I have two questions and would like some help.I currently have a WLC5508 Anchor in the DMZ for visiting users, which is part of the mobility group with an SSO-9800 (IRCM). That said, we have a project to add a Backup WLC, which would be part ...
Hi, I need help with an understanding.I currently have an implementation with two SNS3615 ISEs in the Data Center.ISE01 => Admin, Monitoring, Policy Service (Persona) | PRI(A), SEC(M) (Roles) | Session, Profiler (Services)ISE02 => Admin, Monitoring, ...
Hello,We were impacted by the vulnerability https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-persist-rce-FLsNXF4h, and following recommendations from the TAC, I had to update my pair of ASAs from version 9...
I need to know if the rule I configured and validated is a good configuration practice in a production environment, can you check and help me feel more at ease?I set up a laboratory to connect via PEAP EAP-TLS, it worked in the lab, but I would like ...
Yes! Thank you for the information and clarity in the details.Yes! I will talk internally about when the MX for site B will arrive, because from what we discussed, it will simplify the configurations and architecture with BGP.Both router B and router...
It clarified and helped a lot.I really appreciate your tips and time.However, I still have some questions about the migration phase?1 - Why should I use e-BGP and not OSPF? Would e-BGP with MX be more practical or is there no difference if I were to ...
Perfect! About the architecture you understood perfectly. I apologize, it was my mistake not to share more information. We are updating our plant:From ASA5500 to FTDAPs 2807 to APs CW9xxRouters C890 to MXSwitches 2960 to C9300 and 2 MS120-8-HW The li...
Thanks @martin-lystad We will change our topology to Meraki, both at site A and site B, however, the equipment only arrived at site A. When they arrive at site B, we will have the complete SD-WAN, however, I need to know how to make communication bet...
