Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello ,I'm facing an odd problem with the switch Cisco C1300 when authenticating with Fortinac.When authenticating a printer (Static IP) or a Huawei AP (DHCP), the Fortinac puts the device on the correct VLAN. The switch receives and recognizes the V...
Hello,I'm using cisco is 2.7 to dynamically assign VLANs to users connecting with WIFI. I have Cisco 9800 vWLC and access point 9105.We have tried everything: from new virtual machines, new VLANs, local mode, flex and all, but we keep getting the sam...
Hello,I received an error on Cisco ISE telling me that the local certificate on the primary server has expired and when I try to check Certificate Management->System certificate or trusted certificate the screen is blank .I tried to restart services,...
Hello,I'm using ise 2.7 and started facing problems with authentication when the users are asked to change their AD password :-The first one : user is asked to change password and if the password matches the criteria the new password is accepted, an...
Hello ,I m trying to configure DACL on ise to allow vpn traffic to specific destinations. But after i configure them i get the auth logs as passed and authorized but on my machine it asks me to reconnect again and again. Can any one help me please. ...
Hello ,is this vlan allowed for dhcp : Yes do you have any snooping applied or is the port missing portfast : No snooping applied and Yes portfast is applied .Also if we remove authentication on our switch c1300 or connect the AP to another switch wi...
Hello ,The device is getting the VLAN from FortiNac and its configured to look for DHCP server . There is no need to mention DHCP on the Interface .Regards ,
Hello , It turns out it was our fault, since the team was only testing with one user on one clan, but when we tested other users on multiple vlans it all worked perfectly.Regards ,
Hello , Thanks for responding .As for the error it's not an error message but the users can connect to the WIFI but they dont get an IP address and in the ise it shows authenticated and i can see the user on the WLC . Regards ,
