Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Team,
I have an issue trying to connect a Catalyst C9200CX to the On-Prem Server using CSLU.
The Switch is a C9200X-12P-2X2G with version 17.09.05. It is possible to ping and telnet the On-Prem Server.
On the On-Prem Server, it appears the avai...
Hello Community,
We are trying to configure the http destination profile on Nexus C9508 under the CallHome section.
Nexus9508 version: 9.3 (10)
However, the following message is displayed:
"Failure reason: The action failed because smart license prof...
Hello Team,
we tried to retrieve all switches in stack using Cisco Prime Infrastructure 3.10, but we are out of solution.
From the Tool, we tried the Report Launchpad/ Device / Detailed Hardware / Switches and hubs, but without success.
If we use the...
Hello Community Team,
I have setup a SSMoP server on my Company and I would like to integrate Cisco ISE for TACACS+ authentication.
Is it possible to define 2 ou 3 types of users with different types of access on the ISE server or the users are defin...
Hello guys,
We have some Nexus 7700 (IOS Version 8.2(1)) that present recurrently the following error messages:
- %DAEMON-1-SYSTEM_MSG: fatal: PAM: pam_setcred(): Authentication failure - dcos_sshd[2809].
- %TACACS-3-TACACS_ERROR_MESSAGE: All ser...
Hello Community Team,
We just upgraded SSMoP with new version 8-202308, and it seems the issue still maintains.
Configuring a Tacacs login, we are able to access the platform, how ever there is only 2 possible users:
- System user, user that can acc...
Hi,
unfortunately NXOS 9.3(10) does not provide this command line also:
NX9K(config)# license smart ? enable Enable smart license reservation Smart license reservation
Any thought?
Hello Flávio,
We also tried to use the CISCO_TAC profile and it is not successful, there was a message error: "Failure reason: Fail to send out Call Home HTTP message.
In our case, we need to use the On-Prem Satellite method and not the direct connec...
