Hi ,We are plannig to procure cisco 2901 terminal router with below HWIC card and async cable for Access points conole connection to these terminal routers....want to know what is the maximum length the cable can be extended from the terminal lrouter...

I have connected Cisco Unified IP Phonemodel 6941 on LAN card WS-X6148-RJ45V of 6500 switch..but phone is not workign with the switch inline POEPlease advise.

I have three eigrp configured routers A, B , C in a single broad cast LAN.I want to deny router A eigrp peering with router B, need to retain A peering with C. what is the best solution.A router----------------no neighbor <B router lan ip> under rout...

I need to enable port mirrorng on "WS-2950-24" port switch, we have IP phones and PC connected on the same switch port and voice vlan is configured for IP phone..need to capture only IP phone vlan traffic.Need to capture ip phone call on voice logger...

we have two routers runing eigrp A and B. C router running static route.A, B and C having common LAN and eigrp is enabled between A and B through the local LAN.we are rediscbuting static to EIGRP with route map on A and B router.from C router we have...