Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello EveryoneI have an odd issue with 2 Nexus9000s (DS01 and DS02), these nexus have 2 port-channels:
Po13 for the peer IinkPo5 to the switches cores Nexus7700
I created the vlan 550 with network 10.21.50.0/24, the hsrp is .1, the primary switch ...
Hello
Dear Support Community
Do you know if Cisco has a tool where i can get a vulnerability report for a specific ASA FW Version?
Example
ASA 5516-X
9.5(2)
Or can you give me an advise to check the vulnerabilities for a specific version?
Hello Everyone I have 2 WLCs in Site A,1 WLC in Site B and 2 SSIDsEmployeesGuests Site A:Primary WLC: Most of APs are registered in this WLC (Version 7.0.250.0)Anchored WLC: This is only for Guest Wireless (Version 7.4.121.0) Site B:Backup WLC: some ...
Hello Everyone I have an ISE with an AD integration, i am trying to limit the access to the wireless users, i only added one OU "wireless users", but all the users can access to the wireless network, i just want to allow the access to the users in th...
Hello EveryoneIs it possible to have a WLC 4402 and a WLC 5508 working with the Guest portal of the ISE at the same time? I know that for the WLC 5508, it works fine and i can implement this as CWA, but for the WLC 4402? i read something about change...
Yes , They are, I am checking some best designs for the vpcs, But I will try that in a maintenance window.
Thanks a lot for the follow up Reza!
Regards
Israel
It looks like there is a loop
RX01# traceroute 10.21.6.5traceroute to 10.21.6.5 (10.21.6.5), 30 hops max, 40 byte packets 1 10.21.50.5 (10.21.50.5) 1.143 ms 1.015 ms 1.017 ms 2 10.21.50.3 (10.21.50.3) 1.322 ms 1.407 ms 1.688 ms 3 10.21.50.5 (10.21.50...
