Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We replaced a failed Cisco ASA 5515-X with the same model and restored the original configuration. No ohter changes were made.Environment:- ASA Version: 9.12(4)58- Cisco : 3.x- Same hostname, IP address, TACACS servers, shared secret, and AAA configu...
I'm investigating a case where a user made configuration changes across various sites, and I'm trying to prepare a report from Cisco Prime Infrastructure 3.7.Ideally the report would include:- Device Name / IP- Configuration diff- Site (grouped by si...
Host A will ping Host B's IP address via IPsec, but the actual responder is Host C. I just wanted to see if this kind of scenario is possible with Cisco ASAv. Host A is the client side, and Host B is a phantom IP on ASAv. However, Host C is the actua...
Having several objects with "TEMP_" for example, tenant TEMP_tenant_A, vrf TEMP_vrf_A, TEMP_LIP_A etc. was looking for a quick way to delete those objects. Postman is an option, but since the "TEMP_" objects are scattered all over the place, it's dif...
I'm trying to update subnets via Postman; I'm not sure, but in a product production environment, I can't always use APIC inspector, so I thought I'd try with a browser URL. Is it necessary to always use the URL from the inspector or is there another ...
Yes, the command is there, as we have other exact same devices/config in production.The tricky part is that the "test aaa-server" command authenticates successfully, but SSH does not. I was AAA-locked out once, but somehow ASDM still allowed me to ex...
Thank you, Normally, we practice such that internet users can access our private IP address server using a public address and mapping it to a private one. However, for this case, instead of using the internet IP, we are going to use an IPsec VPN. My ...
RedNectar >So 06:48:07-06:46:31=00:01:36 which is not too shabbyAgree, maybe there is some issue with our environment. It took more than 4 hours, but it was still going on. So it could be a different case. >I really don't think the This command is b...
@RedNectarThank you! - again. Indeed, it works now. but noticed the process is too slow. may be because of the following error? thinking about collecting DNs and simply POSTing them.This command is being deprecated on APIC controller, please use NXOS...
