Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I write this in our network premesis we have below FW. i have mention the current running IOS on it. In some Other brand firewall i can get the suggest for the firmware upgradation. Does cisco also have a suggest version to download the firmware ? if...
I need a complete information about the cisco catalyst 1300 & 9200 series.As is checked online with C1300 the total output power is 190 watts. how much will be the output in the interfaces.Can this switch support to connect for full CCTV camera load....
Only i have issues with the port channel 8,9 & 10, all the rest port channels are working perferct. i raised a cisco tag too. 7 Po7(SU) LACP Gi1/0/25(P) Gi2/0/25(P)8 Po8(SU) LACP Gi1/0/18(P) Gi2/0/18(s)9 Po9(SU) LACP Gi1/0/19(P) Gi2/0/19(s)10 Po10(SU...
CoreSW#sh etherchannel 13 summaryFlags: D - down P - bundled in port-channelI - stand-alone s - suspendedH - Hot-standby (LACP only)R - Layer3 S - Layer2U - in use f - failed to allocate aggregatorM - not in use, minimum links not metu - unsuitable f...
Hi,I have recently recovered my cisco c9300 username and password. after the recovery i can't login to the ssh of the siwtch. below configuration on the switchline con 0exec-timeout 15 0password 123456login localstopbits 1line vty 0 4password 12345lo...
Two uplink is mandatory. And Camera count can't be confirmed at this time. But i understand your answer rough i can calculate it like in a 24 port PoE switch we can able to connect 20 Camera with equal power disturbustion right. If we increase one m...
i have a question according to this point. The Cisco Catalyst 1300X Series Switches include select models that support up to 10 x 60W PoE++ (802.3BT) ports. This enhanced capability enables you to power demanding devices—such as full-featured Wi-Fi 7...
