We have two Cisco Catalyst 9800-L-F WLC's in HA config.We setup a Guest wireless SSID with a custom WebConsent page.Currently when a use accesses the SSID it takes them to a "Your connection is not private" HTTPS page.We don't need HTTPS on our Gues...
We have two Cisco 9800-L-F Wireless Controllers in an HA pair with RP. When there is a failover event the GUI is no longer available.You can navigate to the GUI page and login but after that all you see is a white screen. We still get pop-up notifi...
Is there a way to prepopulate the AnyConnect v4.9 Client DefaultHostName when deploying the AnyConnect Client?Could we push out a preferences xml with the <DefaultHostName> and <DefaultGroup> already filled in or would this be overwritten when a user...
This might be something "everyone" knows but... How often does Cisco Identity Services Engine sync it's time?Is there an easy way to check this or can it be modified?
Recently we built up a new Cisco ISE 3.1.0.518 system. We have 2 systems set as NTP servers. I set the timezone to Etc\UTC-4 (we are in Ohio) and when it syncs, the time is 8 hours off. I.E. At 10:27am the system says the time is 18:28 (6:28pm). ...
This is how one of our VP's wants it setup, with a splash page, a disclaimer and a consent button. This is how it was setup by previous network admins, this is the way they want it setup on the new controller. I don't make the decisions; I just mak...
Cisco IOS XE Software, Version 17.09.03Cisco IOS Software [Cupertino], C9800 Software (C9800_IOSXE-K9), Version 17.9.3, RELEASE SOFTWARE (fc6)We've tried a different PC/Laptop to try accessing the GUI and still see only the white screenRan the "servi...
The issue did turn out to be related to the timezone. I originally had the time zone set to Etc/UTC -4 and the server time was 8 hours off. I changed the timezone to Est like our old ISE server and the time was still off. This morning I changed th...