So, are these two NTP instances going to see one another as NTP peers/ association ... View more

I saw a SIMILAR situation in 10.6 and 11.5 :  in one case LDAP service account was locked out (TAC tracked to a known bug in 10.6....ick) https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuu01267/?reffering_site=dumpcr in 11.5, We ran into a reported scenario defy logic: user already signed into CSF would get "invalid username or password" when clicking on Voicemail....even though their password is SAVED (correctly) and their LDAP account was CERTAINLY not locked out...and the SERVICE account was certainly not locked out. We TAC'd it and the cause was tracked to the Unity (9.1.2) system and UCCX (9.0.2) appearing to reject new connections. We pulled Detailed traces from RIS/Tomcat/VMRest.....and had very little success getting any further than just a guess.    Restart of RIS, / VMREST and CuCsMgr seems to have solved it:        but it was a hard problem to recreate and event TAC states clearly that they are guessing. We noted some Core's on the UCCX,  and the Backtrace on them were approx. USELESS: ...etc ====================================  backtrace ===================================  #0  0x006fd266 in ?? () ==================================== etc...   ====================================  backtrace  ===================================  #0  0x00131fdf in ?? ()  ==================================== ... View more

One remaining question:  is this change service impacting? ... View more

no mention of unity, im/p Reboot is different than shutdown. We should address the lack of clear documentation here. http://docwiki.cisco.com/wiki/Cisco_Unified_Presence,_Release_7.x_--_How_to_Shut_Down_and_Restart_the_Cisco_Unified_Operating_System#Shutting_Down_the_System ... View more

I'm looking for that same answer. 1.3.6.1.4.1.9.9.156.1.1.2.1.5   - doesn't respond on my 9.1.2.12900-11 servers. In the interm, I've created a groovy that collects and reports the status every 15 minutes or so. cli.expect("admin:") cli.send("show perf query class \"Number of Replicates Created and State of Replication\"\n") output.  - Perf class (Number of Replicates Created and State of Replication) has instances and values:     ReplicateCount  -> Number of Replicates Created   = 603     ReplicateCount  -> Replicate_State                = 2 REGEX the Replicate_State and alert on !=2   (2 means everything is fine) ... View more

QUALITY POST:   ONLY issues I have with it is that there isn't direct specification of process with reguards to Unity and IM/P. I'm dealing with a 9.1.2 environment:  and I'm checking my self against this and TAC to confirm. SHOULD Subs'  certs be imported through the Pub,  or on the CM Sub directly? You have to import the CUC cert chain on the CUC directly...(in 9). I see the date here : so I know I'm late to the party on this conversation. I note changes from 7 to 8 in this specific arena. I'd LIKE to see a follow up / repost of the above with a brief run down of major diff from 7, 8, 9, 10 and 11 so that this one doc could be a one-stop-shop answer for the whole of the process. ... View more

this was 100% simpler then it seems. Step 1.  confirm your NEW sup has the same IOS version as the existing SUP. Step 2.  boot it in a LAB and make sure it does NOT have a config on it. Step 3.  Plug it into the production system (does not cause any outage effect) Step 4.  From console,  go to conf t :  Redun \n   mode sso \n exit \n   wr me \n Step 5.  SHOW MODULE   .....do this for 15 minutes and WATCH the results transition from RPR mode to SSO mode .....that test with a manual fail over, fail back once confirmed......case closed ... View more

Siong,             Your response does not appear to directly match the question asked. It is well documented how to upgrade iOS when both SUP are already in place....common. p.mckay's Question is, "what happens on the day you ADD a SECOND SUP where the isn't already one?"   It is a great question, and I am assuming there is SOME blip of outage or the full 15 minute reboot cycle until I find CLEAR documenation otherwise.   The specific point of the question is HOW does the 4507R Act, when you initially introduce a second SUP for the very first time.      I'm hunting this answer actively, and not getting very much traction either.    I'll update my post when I find a good answer to this. ... View more

I MEANT to rate that response 5 starts, but my mouse did not cooperate.   ... View more

I spent too much time walking the mib to get to this...but I hope I can spare some of you the time. 2900 running 15.2(2) 1.3.6.1.4.1.9.9.63.1.3.8.4.1.1.10001 for UAC (actual calls from CUBE out to SIP Peer 1.3.6.1.4.1.9.9.63.1.3.8.4.1.2.10002 for UAS between CUBE and CUCM 1.3.6.1.4.1.9.9.63.1.3.8.4.1.2.90002 for UAS between CUBE and Internal UA making the calls.   Note CUBE does transcode ....so you might want to also look up H323 / PRI / SCCP.   What you monitor depends on what that CUBE is doing in your environment.   ... View more

Ultimately what you want to measure and alert on is changes in CRC over time. You will sometimes see CRC intermittently as a port negotiates port speed and duplex. The issue isn't one or two CRC's,  the issues that matter (UDLD/STP/Flapping etc) come up when you see a constant stream of CRC.   in my case...I was seeing 150 crc per polling window.....obviously a constant problem that was tracked to a bad cable run to an IP camera that was installed a while ago.   ... View more

Agree, the acl and Nat (inside and outside) are not there.   Most likely the traffic was all flowing to core and heading out to the internet from there.   before setting up the NAT, you might want to check company policy and see if there is content filtering or DNS re-write happening closer to the core.     If you provided the branch with Facebook access when the rest of the LAN never had it....might be problematic later on.   ... View more

SO CONCISE AND CLEAR! :    BEST NUTSHELL EVER.       ... View more