Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, On my switch (9200), I have several alert (every 2 minutes) regarding multicast packet. These ports are member of 2 port-channel to connect our VMware ESX. The configuration of the swith is :!interface Port-channel10Description vSwitch_ESX1swi...
Hi,On my network, I have a stack with 2 C3850-12s (12 x 1Gbps sfp). This Core stack is connected to our access stack based on 2xC9200L-48P-4x (switch with 10Gbps module). From the 1st member of c3850-12s, I have 2 physical links connected to the firs...
BonjourJe souhaiterais avoir un avis sur la meilleure architecture possible par rapport au matériel dont je dispose. Actuellement, nous avons :- 1 cluster de 2xWathguard (avec 1 module d'extension de 4 ports 10Go)- 1 stack de 2xCatalyst C3850-12s (s...
Hello, I would like to have your support to define the best architecture with our equipment. Currently, we have- 1 cluster of firewalls with 2xWathguard (with 4x10Go extension module embadded)- 1 stack with 2xCatalyst C3850-12s (without 10G module bu...
Hello I have a 3750 swtich where I configured 2 vlans : 610 & 611. On the interface Gi1/0/23, I configured this interface in trunk mode for 610&611. This physical interface is connected to my firewall on interface eth5. On my firewall, I configured 2...
Currently, we have only 1Gbps link between switches not 10gbps even if we have module on 9200L supported 10Gbps link. But at the moment, only sfp on both equipment (c3850 & 9200) connected with FOBR
BonjourMerci pour le retour et les liens où effectivement, les performances des C3850 se prêtent plus à des fonctions de L3. Concernant les 9200 qui sont connecté sur les C3850 et qui forment le cœur de réseau avec ceux-ci, ces 9200 sont destinés à r...
