Hi Team,
Recently we have purchased Cisco 1941 router for IPV6 routing and subnetting testing, this router having IP Base license default,
So my question is, can i do the IPV6 routing with IPBase license else should i go(...
Hi Team,
We are having cisco 3802i access point and working through Mobility Express mode, when i am connecting to ISP modem directly, i can able to work with Mobile devices only not laptop's, mobile devices is giving the same bandwid...
Hi Team,
We had purchased 3802i model Access point recently, we would like to work with standalone mode, so i tried to download the Autonomous IOS from cisco website, but this software doesn't available. can someone do help to resolve ...
Hi All,
Recently we had upgrade our 2 no of 6880 core switches, so after upgrading syslog is not receiving messages in PRTG tool, string i am using as a OSIND, not public, meanwhile i can get traffic information in any port through Traffic s...
Hi Team,
we are using AIR-CT5760 controller in our network, almost 800 users connected, but some users (only) getting IP conflict again and again, Kindly advise what could be the issue?
Regards,
Bala
Regards
Hi Team,
I have upgraded to 8.3, but i can able to work with Mobile devices only not laptop's.I am getting the error form Master AP while i am pinging from laptop(192.168.1.1) as attached Image but i can able to ping that AP from laptop...
Hi Leo,
As per the document, I have assigned the IP address to the AP through the following command
#capwap ap ip 10.0.0.2 255.255.255.0 10.0.0.1
then, i have assigned the ip address to the system
10.0.0.1 255.255.255.0 default gateway 10...
Hi Leo,
Thanks for your valuable reply, meanwhile i just wants to know some details
1. I am going to directly connect this AP to ISP (not through switch) , so i need to create dhcp in AP only, Is it possible in Mobility Express?
2. I want ...