Need the details about Data license in 1941 router

[balamurugan48011]

Hi Team,

              Recently we have purchased Cisco 1941 router for IPV6 routing and subnetting testing, this router having IP Base license default, 

              So my question is, can i do the IPV6 routing with IPBase license else should i go(purchase) with Data license?

Regards,

Bala

[Mark Malone]

Hi

it looks like its there alright , you should be able to check too in running-config ..show run all try an configure it under an interface , if the syntax is there its supported

http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/software-activation-on-integrated-services-routers-isr/white_paper_c11_556985.html#wp9001377

Technology Package	Details	Software Activation Feature Licenses	Right to Use Feature Licenses
IPBaseK9	Offers features found in IPBase IOS image on ISR 1800,2800 and 3800 + Flexible Netflow + IPV6 parity for IPV4 features present in IPBase. Some of the key feature are AAA BGP, OSPF, EIGRP, ISIS, RIP PBR IGMP, Multicast DHCP HSRP, GLBP NHRP HTTP HQF QoS ACL, NBAR GRE CDP, ARP NTP PPP PPPoA PPPoE RADIUS TACACS SCTP SMDS SNMP STP VLAN DTP IGMP Snooping SPAN WCCP ISDN ADSL over ISDN NAT-Basic X.25, RSVP, NTP, Flexible Netflow etc.	None	None