Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a way to set up a new admin user on ACS 5.2 appliance through logging into the device via SSH?We lost our password for https access but can get in via ssh. I want to set up another user with https access from the SSH interface.Thanks. ...
I have a quick question regarding something I might be missing. We have a site to site VPN set up with an ASA 5510 on our end and a partner Cisco Router.The VPN is live and our partner can ping across to my external interface and I can ping down the...
Our firewall guy is still laid up in the hospital and I don't want to screw anything up. I have a very easy question on ACLs. we need to allow access to port 636 on a specific host on our end by only 2 unique ip addresses from the outside. any qui...
Hello I have a regular remote access VPN set up on our ASA 5505 and need to convert it to a split-tunnel so we can continue to access out local lan resources while being on the VPN. Any help would be greatly appreciated!I attached our current config...
Our firewall guy is in the hospitaland I got this project thrown at me. We have a Pix 515 that does NAT for our network and we need to change our whole internal IPaddress scheme. we are on 192.168.10.0 now and it needs ot move to something like 192...
well the 172.16.30.0 is my VPN address network for Cisco Ipsec client based vpnthe 172.28.40.0 is the internal on the other side of tunnel #2.so do i still need the nat statements for the point to point vpn?
