Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Located in the Jacksonville, FL USA area, cannot seem to create a dial plan for 7 digit dialing. Area code is (904) and I don't see an option where to change from 10 digit to 7 digit outbound dialing. Am I missing something?
I have a customer who wants to use their PIX 506E with their new 1841 basic IP IOS router. They have 1 IP address available. Is it possible to just have the PIX be a firewall and all routing functions work through the 1841 or will I need NAT turned o...
I have a customer who wants to use their PIX 506E with their new 1841 basic IP IOS router. They have 1 IP address available. Is it possible to just have the PIX be a firewall and all routing functions work through the 1841 or will I need NAT turned o...
I have a question regarding configuration of a network regarding 2 3750 core routers with 6-8 3550 switches. The customer currently has a configuration loaded but the processor is at 40-60 percent with a multiple VLAN configuration. It appears to be ...
Have to agree with previous post. Not really an alternative product that Cisco is offering in replacement of the Onplus portal. We purchased quite a few of these and enjoyed selling Cisco products knowing we could monitor/support them easily with not...
We have revisited the IP scheme and the ISP has decided to give us 5 IP addresses. This changes the scope. The new plan is to have NAT/PAT on the 1841 and have the 506 just doing firewall functions...Internet66.55.44.33 External IP of 50666.55.44.34 ...
Thanks for the fast response... In lies my dilemma.The customer wants the 506E to just be a Firewall, not a router doing NAT/PAT. That was my first option but with 1 ip address. They purchased an 1841 from Cisco under the impression that the PIX woul...
After talking with Cisco TAC...Looks like we can do 1 public IP addy to PIX506E to external interface, then internal IP address to internal interface facing the 1841 external interface. Then having NAT/PAT taking place there.Internet IP -->66.55.44.3...
Thanks Kevin for your help. From further diagnosis, it looks like they have alot of traffic, but I would like to narrow it down. I am pursuing the avenue with Microsoft as well, but my gut is that there's just way too much traffic and engineering on ...
