About csco11633218

csco11633218 · 09-17-2020

I am deploying a lab on a hybrid environment, where a Vedge is connected to both transport (mpls and internet). I configured a static dns to vbond using the command bellow. vpn 0 host vbond.example.com ip 10.1.1.1 201.1.1.1 The problem arise when a i...

csco11633218 · 08-15-2020

A question to the Experts. Please refer to the topology attached. I am trying to deploy a topology to simulate all possibles designs. I am struggling to configure vedge in-line. It seems that vedge3 is not routing traffic from other routers (vedge2, ...

csco11633218 · 06-28-2020

I am trying to create a lab on ESXI 6.7 using vManage,vBond,vSmart with all VMs running the same version 20.1.1.I am getting frustrated, maybe somebody here can point me to the right direction. I have no connectivity between vManage and vBond, and t...

csco11633218 · 10-20-2013

Hello, everybody.Cisco says that EEM applet send email using smtp port "25" by default. In order to use other port we should use a tcl script.So my question is how to edit SENDMAIL.TCL script to add the port number, (i.e. 465) ?Thanks.

csco11633218 · 09-21-2020

Thanks for replying. So, we need 2 DNS servers to accomplish this?I thought was just one with both A record entries (private, public). Thanks

csco11633218 · 08-17-2020

Hello. Did you find a solution? I am stuck with this too. It worse I don’t see people helping much. Most of the post doesn’t have answers. In my case I don’t have connectivity between VEDGES devices. I am doing On-Premise deployment with a vedge in-l...

csco11633218 · 08-17-2020

It seems that nobody knows about it, or nobody is doing labs.

csco11633218 · 07-05-2020

I solved the problem after reading carefully a lab guide at ciscolive. There is a note that says: Note: By default, vManage OVA is configure with a single interface (eth0) Note II: Adding additional interface remaps eth0 to vNIC 2. After remapping th...

Member Since	‎10-03-2012 11:29 AM
Date Last Visited	‎07-17-2024 01:48 AM
Posts	8

User Statistics

User Activity

SDWAN Vbond DNS on a Hybrid environment

VEDGE IN-LINE deployment with Controllers On-Prem

No connectivity between vBond and vManage (20.1.1)

SMTP Port 465 in Sendmail.tcl

Re: SDWAN Vbond DNS on a Hybrid environment

Re: RE: On Premise SD-WAN Controller Deployment

Re: VEDGE IN-LINE deployment with Controllers On-Prem

Re: No connectivity between vBond and vManage (20.1.1)