Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a few brand new out of box Cisco IE2000 switches, and during the post, it's running a few tests, and finishing off with a status of "Skipped". Is this normal, or something I should be concerned about. Why would it be skipping these tests.
POST...
Hi there, I have a Cisco ASA 5505 running at my house. It has been running fine for the past year but lately the outside interface seems to be failing. Basically my internet connection seems to be going down, all internal devices are still able to co...
I have a 5515-X ASA and we are working on setting up a webserver that whould be accessible from the outside as weel as the inside.The NAT rule allowing the webserver that is located on an internal LAN to be successful when accessing from the outside....
The ASA is being used as a boundary between my home network and the internet, as well as using it for VPN into office network for one device. It went out again, this time, twice within an hour. I have attached a log file containing the commands/outpu...
Thanks for the reply, so when it failed again (predictably roughly 12 hours after the previous time) i checked everything you mentioned, and the interfaces (eth0/0 and vlan2) where all fine. I also tried changing the interface to an unused port, and ...
