Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to Upgrade code on Cisco APs by moving the AP to a New Controller with Newer Code. This process is taking three hours per AP. I have hundreds of APs. Is this a known issue? Cisco suggests upgrading via console port on each ap, but tha...
Recent Cisco IOS version for stack switching is so unstable we have pulled Cisco Inventory. IOS bugs causing stacks to reboot, and all cisco can recommend is downgrading to a previous version, which also was so full of bugs we had to do yet another...
I have a cisco 2800 rtr, with 4 card slots. Rtr will not recognize or power t1 wic or t1vwic cards in any slot. IOS will not recognize serial / controller interfaces. HELP?
I have a large wireless network, and everything works very well except on location. I have tried several APs on this WS-2950. The error Im getting is:Tue Jun 5 14:06:15 2007 [ERROR] spam_lrad.c 1162: Processing of Discovery Request failed from AP ...
i have many 3700s to upgrade. i would love to hear more about your method. How many did you do at the same time? Several of my sites have 50+ 3700, 3802s
Thank You for the info. In my Test environment, I am local to the WLC with only a C3850 between the AP and WLC. Still taking 3 hours. But I have over 100 Remote APs over MetroE circuits, also a 3 hour download for just a single AP. Even when I fi...
I have 4 5520 WLCs. Two running 8.3 and Two running 8.10Im moving APs over to the 8.10 controllers because we had issues with re-booting the older code WLCs. We want to Retire Them.We are also moving wholesale to Meraki, but as I have over 2000 AP...
latency is certainly what we want to avoid as some sites have 50+ APs to upgrade, and We are a HOSPITAL. Downtime is a nono.We have a Hugh amount of wifi medical devices.
You are correct. Moving APs from old code controller to another controller with Newer code. Models are 3800s. Im doing this by swapping Primary vs Secondary controller IP on the AP, and rebooting.Looking now how to do a Pre-download. Under AP ADVA...
