About malkovich072

malkovich072 · 08-21-2022

Hi everybody.I have WLC 9800 (17.3.3, 17.3.5b, 17.6.3) and ISE 2.7 and WIndows clients.Authorization in the ISE occurs using PEAP-TLS. (eap-tls + ms-chap v2)There are 2 different rules configured on the ISE side.When connected, the computer is subjec...

malkovich072 · 05-10-2022

HelloThere is a cluster in HA. The primary node is reinstalled and it is not possible to restore HA with the secondary.At the same time, the secondary node is currently active and HA is configured on it. It cannot be removed.How can I remove HA on th...

malkovich072 · 04-08-2022

Hello guys.When enabling IP SLA on 1800s sensors and connecting to C9130 or C4800 access points, I get the error 'No response ip sla responder'. At the same time I see: that on some points the ip sla responder is enabled, and on some it is disabled, ...

malkovich072 · 05-10-2022

I don't have backup from primary. There is a backup from the secondary node. When restoring this backup on a new primary node, errors occur when starting NCS processes. I need to remove HA from the secondary node via shell. This cannot be done throug...

malkovich072 · 05-10-2022

the problem was P2P traffic blocking

malkovich072 · 04-10-2022

This does not solve the problem. I have all the current versions installed.

malkovich072 · 04-08-2022

WLC 8540 version AireOS 8.10.162.6DNAC version - 2.2.3.4 "The problem can be related to WLC version or AP mode. C4800 supports but not sure about C9130."The IP SLA responder feature is available on:Wave 2 APs: Aironet 1800, 2800, 3800, and 4800 Serie...

Member Since	‎04-08-2022 11:58 AM
Date Last Visited	‎08-24-2022 12:01 AM
Posts	7
Total Helpful Votes Received	10

User Statistics

User Activity

WLC 9800 AAA issue

Cisco Prime Infrastructure 3.8 secondary active node HA

No response ip sla responder

Re: Cisco Prime Infrastructure 3.8 secondary active node HA

Re: No response ip sla responder

Re: No response ip sla responder

Re: No response ip sla responder