Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a customer that needs to add several 7975 SCCP phones to a Business Edition 5000 running CM verison 8.x. I have uploaded the .sbn files to the BE successfuly but do not get an option to add a 7975 under User Management -> Add User/Phone. The t...
I have CME 3.1 and IOS 12.2.8T3. I have a hunt group setup with two extensions, both are ip phones homed off the CME. The final number needs to ring a non ip phone hanging off an external key system (it is acutally long distance). The two ip phone ex...
I have 1700 routers configured for IPSec, preshared keys, 3DES to connect to a 3005 concentrator. The connection from the 1700 to the concentrator works fine. However, I cannot establish a connection from the concentrator private network to the 1700....
After an upgrade from 3.13a spf to 3.14b spc, the corporate directory fails. Pressing search after entering a name yields the following error message;Error Description: Object doesn't support this property or method. Error Number - 7ff5fe4aI resynced...
Any radio that you can get a cable for will work. A good option are FRS radios that you can pick up cheap any place that sells electronics. Networkradios.com can make custom cables if they have your radio specs.
Rick,I also installed CCM sp3 for 2k and spc for 3.14b. The event viewer does not show anything but transcient disconnects on an ATA. How do I tell if it is IIS related?Thanks for the help!!
Take a look at the following site. It list all of the area codes controlled by the North American Numbering Plan Administration.http://www.nanpa.com/Hope this helps.
