I have an POE module WS-X4648-RJ45V+E on WS-C4507R+E showing no power inline on all of the ports ? is AC module too low, only 1000W, or IOS ?
#show power inline Available:0(w) Used:0(w) Remaining:0(w)
Interface Admin Oper Power(Watts) Device Cl...
can i configure two ASA services module sitting in on chassis (6506-E with 720-10G) as clustering ? or has to use VSS mode ?
any config example link? Tried search online but can not find any related to ASASM case
site A is l2l vpn, site B is network-extend vpn, both connect to same vpn device 5510 at central office and work well. I can ping from central office to both remote sites, But i can not ping between these two vpn sites ? Tried debug icmp, i can ...