I have an POE module WS-X4648-RJ45V+E on WS-C4507R+E showing no power inline on all of the ports ? is AC module too low, only 1000W, or IOS ?
#show power inline
Available:0(w) Used:0(w) Remaining:0(w)
Interface Admin Oper Power(Watts) Device Class
From PS To Device
--------- ------ ---------- ---------- ---------- ------------------- -----
Gi1/1/1 auto off 0.0 0.0 n/a n/a
Gi1/1/2 auto off 0.0 0.0 n/a n/a
Gi1/1/3 auto off 0.0 0.0 n/a n/a
Gi1/1/4 auto off 0.0 0.0 n/a n/a
!
#show power detail
Executing the command on VSS member switch role = VSS Active, id = 1
Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C45-1000AC AC 1000W good good n.a.
PS2 PWR-C45-1000AC AC 1000W good good n.a.
Power supplies needed by system : 1
Power supplies currently available : 2
Power Summary Maximum
(in Watts) Used Available
---------------------- ---- ---------
System Power (12V) 697 1050
Inline Power (-50V) 0 0
Backplane Power (3.3V) 40 40
---------------------- ---- ---------
Total 737 1090
Power fail interrupts received on slot 1: 0
Power fail interrupts received on slot 2: 0
Debounce value for power fail status: 0 microseconds
Watts Used of System Power(12V)
Mod Model budgeted instantaneous peak out of reset in reset
---- ------------------- -------- ------------- ------ ------------ --------
1 WS-X4648-RJ45V+E 92 -- -- 92 10
2 WS-X4648-RJ45V+E 92 -- -- 92 10
3 WS-X45-SUP7L-E 263 89 91 263 100
5 WS-X4624-SFP-E 45 -- -- 45 10
6 WS-X4612-SFP-E 40 -- -- 40 5
-- Fan Tray 165 -- -- -- --
------------------------- -------- ------------- ------ ------------ --------
Total 697 89 91 532 135
Watts used of Chassis Inline Power (-50V)
cat4500e-universalk9.SPA.03.04.05.SG.151-2.SG5.bin
thanks...
