Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiIn a fabric-extender dual-connected to a pair of nexus 5010 switches, it is not a problem to configure at trunk port on the fex:interface Ethernet100/1/22 description test switchport mode trunk switchport trunk allowed vlan 40-42,107but it doesn...
HeloWith asdm 6.2 (8.2(2)) the config tab is removed with the privilege statements below, but apparantly it doesn't work with asdm 6.3(1) (8.3(1)). Any ideas for fixing that - I want to grant access to read-only Botnet filter information ? Thanks /J...
Apparantly ASA5500 has a limitation on 256 IP-adresses in a dhcp pool ??!!! Why and is there a workaround/ hidden command to disable this limitation, which seems rather arbitrary ? Thanks. /JJ
HiIs there a fixed limitation in the number of vlan stp instances on catalysts or is it depending on the specific platform (somebody has mentioned 128 vlans, but I haven't been able to verify it on CCO)
HeloWe update fwsm acl's by editing textfiles (partial automatically) (with 'clear configure access-list <>' in the top and 'access-list commit' in the bottom)and then tftp'ing them to the fwsms. However scripting this process with 'Expect' has cause...
The interface config is the same on both 5010s, the allowed vlans are on both 5010s, but moving an esxi server with IP addresses in the allowed vlans to the port is not a success.Nexus5010-1# sh vpc consistency-parameters int eth100/1/22 Legend: ...
Hello GiuseppeThanks for your answer. It's the lower end switches I'm worried about (C3750G and C2960G) and I don't think the link you supplied is specific on the number of stp instances supported (or maybe I'm blind ;-)?Thanks, Jesper
Thanks for the answer - I know my acl fundamentals though - the problem is/was how to update entire acl's not ace's (with up to 3000 ace's - total amount of ace's in use: ~19.000 ~ 20 % memory usage) with scripting. The problem seems to have been sol...