Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I´m currently researching for a solution for PPPoE broadband access but I´m required to use an external DHCP Server for IP addressing allocation.I'm wondering how a DHCP Relay could be configured in a Cisco BRAS (7200, ASR1000). The following ...
Hi,I am not so sure about the behaviour of ospf mtu-ignore command. I need to know if the following scenario would it work.I have a link with one interface MTU set to 1500 and the second interface with MTU 1546. I want to configure "ip ospf mtu-ign...
I'm currently trying to setup an ISG using TAL (transparent autologon). I already tested it using the ISG as a DHCP server and it works good.But now I'm trying to make it work using an external DHCP server configuring dhcp relay on ISG and it is not...
Hi All,I have the following issue with an ACE Module configured for source-destination IP stickyness ("both" keyword).The client is accessing a web service through a configured VIP. No proxy is used so each individual client IP address is used to es...
Hello!I'm trying to trigger accounting notifications from an ISG Router to a Radius Server.Whenever a IP Session is created or deleted accounting notifications should be sent to the radius server. The problem is that the aaa accounting messages are ...
Actually, it is not the same scenario I am mentioning.You test it configuring the command in the lower MTU interface, which is something I have seen every where that works.What if you change that MTU to 1546? Can you try it? Does it work?Many thank...
By the way.... sticky resources configuration:resource-class sticky limit-resource all minimum 0.00 maximum unlimited limit-resource sticky minimum 0.01 maximum unlimited...context XXX allocate-interface vlan Y-Z member stickyIf the issue is bein...
I have the following information from the commands you metioned:ACE0# show sticky database client 172.16.88.66sticky group : IPRIStype : IPtimeout : 1440 timeout-activeconns : FALSE sticky-entry rserver-instance ...
I have just upgraded to 12.2(31)SB16 and still behaving the same way According to the Bugs you mention, the problem should be fixed already in 12.2(31)SB12.Do you have any further ideas?
