About e-montagnino

e-montagnino · 05-02-2006

I have an incorrectly switch causing VLAN mismatch log entries. Basically VLAN1 should have been shutdown and the management IP configured on VLAN13. However the IP was put on VLAN1 instead. I have put a temp IP address on VLAN13 (same subnet) but I...

e-montagnino · 07-08-2010

I am also looking into setting up storm/broadcast control and very interested. We have variously sized subnets as well as supernets. How exactly would you factor in network size to setup some starting settings?Thank you.

e-montagnino · 05-08-2006

Thanks for the suggestion. However, the ports are correctly configured on both switches and the 2924 insists that it's own faste0/1 is on VLAN 0. You can read the previous posts to review the details but I think Bobby got it figured out with the CSCe...

e-montagnino · 05-08-2006

Bobby,Thanks for the information! I will look into adjusting the logging for the 2924.

e-montagnino · 05-04-2006

I hope this all wraps ok. Basically, all ports assigned to VLAN13 and no indication of a VLAN0.VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default ...

e-montagnino · 05-03-2006

OK I got out to the switch and was able to set the management IP to VLAN13 and shutdown VLAN1. However I am still seeing the following messages in the 2924XL:%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (0), with ca...

Member Since	‎06-21-2005 07:57 AM
Date Last Visited	‎02-25-2021 07:26 PM
Posts	7

User Statistics

User Activity

Fixing VLAN mismatch error

Re: Storm Control in the access layer

Re: Fixing VLAN mismatch error

Re: Fixing VLAN mismatch error

Re: Fixing VLAN mismatch error

Re: Fixing VLAN mismatch error