Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an application where I need to control a large, AS5850 gateway using MGCP. CUCM version is 9.1, soon to be 10.0. The gateway is populated with CT3 cards.We have confirmed that the AS5850 does in fact support MGCP, however it is not listed as...
Does anyone have an AVST CallXpress voicemail system integrated with Callmanager using the Radvision SCCP (7940) integration? If so, could you post your Callmanager configuration to show how you are getting DID calls to forward to a mailbox?I have t...
Working with a base model 5505 appliance where the number of "Inside Hosts" allowed = 10.Have discovered that the ASA 5505 is very literal when counting the number of "inside" hosts and will refuse to route traffic for any host connected after the li...
(ASA5520 v8.0(4)23)Need a strategy recommendation on the best way to block access to specific (public) IP addresses from access by Inside hosts. Presently we have no access list rules for Inside>Outside, unlike our DMZ where these permissions are ve...
We have test environment that is a duplicate of our production environment. The test and production environments both have hosts on two different subnets (172.16.12.0/24 and 172.16.22.0/24). We want to be able to access the test environment from th...
Have no intention or interest in avoiding the purchase of required licenses. In this particular application an additional access switch is required anyway. We are simply attempting to ascertain whether or not additional licenses must be purchased t...
Thank you, this is what I was looking for. Having scoured the support site for detail on HOW the "Inside Hosts" limitation is actually implemented, available documentation seems to lack detail and is ambiguous at best. For example, the document bel...
I have a 2851 Wan router with an unused GigE interface that is already in the same EIGRP group as the 6500. Would that work? We're going to be freeing up a couple of 2621's soon.
