Hi,I've got this example:r2# show ip bgp 10.5.0.1BGP routing table entry for 10.5.0.0/16, version 11Paths: (2 available, best #1, table Default-IP-Routing-Table) Advertised to non peer-group peers: 192.168.20.4 65502 192.168.30.4 (metric 74...
Hi,I've been trying to find a resource on the net to describe the output of show ip mroute but I'm struggling for a complete explanation. Can someone please helpme with this, let's say I have the following output (taken from an example):(*, 239.255.0...
Hi,I'm seeing the following on my firewall which serves as the default gateway for my network:%ASA-3-305006: regular translation creation failed for icmp src inside:10.224.102.60 dst outside:10.189.0.10 (type 0, code 0)the range 10.244.x.x doesn't ev...
Hi,I've read that a static route will take priority over a route learned via a routing protocol becuase the static route has a lower AD compared to the routing protocols. I'm a little unsure as to what this means, let's say we have the following rout...
HiI've got two WAN links (1G each) I'd like some multicast data i.e from some multicast groups, to primarily use WAN1 as their primary route and WAN2 as their backup, whilst at the same time all other traffic uses WAN2 as the primary and WAN1 as the...
HiTo be honest I copied and pasted an example I found on the web, I just wanted an example that would have the metric statements in. I'm looking for what they mean and why they differ for each network entry, in fact sometimes there not even there.Add...
Thanks for the reply. The only thing is that there isn't a route for that ip to the inside zone, so when doing a traceroute from the firewall the trace goes to the default gateway i.e the outside interface (internet), which is wrong.Any traceroute on...