About tarmahmood1

tarmahmood1 · 06-05-2024

Hello we have CiscoISR4000 series router with gig ports. We are planning to have a 4G/5G line as a backup. I need to know do i need to install a new module NIM-4G-LTE-GA module, or we can have ethernet cable from another 4G gateway and connect to Gi...

tarmahmood1 · 01-25-2024

Hello, I was trying to setup ipsec tunnel with remote device but i get this error. Same configs has worked with other location with same router model ISR4331. Any idea? %IOSXE-5-PLATFORM: R0/0: cpp_cp: QFP:0.0 Thread:001 TS:00023818311620476832 %PUNT...

tarmahmood1 · 01-26-2023

Hi, We have 8xAIR-AP1832I-E-K9 and 5xAIR-CAP2602I-E-K9. At the moment they are connected to 3502 WLC in our other branch office. We will soon move our branch office setup to Meraki. i have two questions 1. Will Cisco 3502WLC will work with Meraki set...

tarmahmood1 · 11-25-2022

Hi, I am new to wireless topic. Our office has a speed of 500Mbps and it shows fine through LAN connection from 480-500, but when i do speed test using Wifi network it shows 20Mbps. I have seen the AP settings and wireless controller nothing seems th...

tarmahmood1 · 05-18-2022

I am trying to setup a TFTP server in Azure VM and download the image from WLC. TFTP is pingable but when i intiate the downloading from WLC it says it is not reachable. In between i have Meraki MX68 FW and i have allowed all traffic. Diagram attache...

tarmahmood1 · 01-30-2024

@Georg Pauwen @MHM Cisco World I did both suggestions you have told but it didnt worked. but the tunnel was not working due to the mismatching of IPs in keyring. so i have concluded these messages has nothing to do with tunnel setup to make the it up...

tarmahmood1 · 03-28-2023

I am not sure if you can relate with your problem, but yesterday i had somehow similiar issue DNS was not resolving. So i removed the config from my interfaces for umbrella DNS, and it got resolved. I am suspecting software bug. Cisco IOS XE Software...

tarmahmood1 · 01-31-2023

@Rich R @marce1000 Thank you for your response. I will further update once the solution is implemented maybe end of feb. @Rich R yes, it is 3504, Yeah i won't be using Meraki and cisco AP in same office. Thanks

tarmahmood1 · 08-30-2022

TFTP worked as in VM(windows) i added rule in windows FW to allow port 69 and application(mycase TFTP64.exe).

tarmahmood1 · 05-19-2022

Hi, Thank you for reply. I am wondering if 1850 works with FTP, since i am only getting TFTP option. Also i tried CLI it shows FTP mode but later when i execute Transfer download start, it shows TFTP in summary table before executing the tftp session...

Member Since	‎05-18-2022 06:33 AM
Date Last Visited	‎12-02-2024 01:41 AM
Posts	10
Total Helpful Votes Received	1

User Statistics

User Activity

Cisco ISR 4000 series with 4G/5G line as backup

%PUNT_INJECT-5-DROP_PUNT_CAUSE:

Cisco 2602 AIR-CAP2602I-E-K9 to 1832I WLC

Speet test with Cisco AP - Wireless

TFTP for WLC not working

Re: %PUNT_INJECT-5-DROP_PUNT_CAUSE:

Re: CSR1000v DNS Issues

Re: Cisco 2602 AIR-CAP2602I-E-K9 to 1832I WLC

Re: TFTP for WLC not working

Re: TFTP for WLC not working