About khuramraza1986

khuramraza1986 · 06-17-2014

Greetings,i have 2 subnets attached to a cisco 2911 192.168.1.0 and 192.168.3.03rd interface is connected with a Modem with address 192.168.4.3 and 192.168.4.1 of modem. there is already a NAT active in DSL modem, any chance I can avoid running NAT o...

khuramraza1986 · 09-15-2013

Greetings, i have a Cisco 2911 router, am connecting 2 subnets 192.168.1.0/24 and 192.168.2.0/24 to Internet somehow its not working, only router is able to ping any external IP but client's can't, client's can commnicate with each other (on differen...

khuramraza1986 · 09-16-2013

thanks john,that actually helps, i have to setup NAT. am a bit confused now, as i have 2 nattings in my network. trying to find a solution for that

khuramraza1986 · 09-15-2013

Hi,thanks for the update, but previously I was only running that modem with switch for around 220 clients in my network. its just a standard adsl router. nothing fancy, no static IP just simple connection.router was required to add new subnet. below ...

khuramraza1986 · 09-15-2013

hi john,am not sure about natting, but i think my modem is doing this jobhttp://support.linksys.com/en-us/support/gateways/WAG320Nabove modem is one am using with an IP of 192.168.4.1 and my GE 0/0 is connecting to it via 192.168.4.3 IPdo i need to s...

khuramraza1986 · 09-15-2013

Update, my clients also can't ping GE 0/0 (192.168.4.3 IP) while they can ping GE 0/1 and GE 0/2 's IP addressesi have even tried to enter 192.168.4.0 in RIP network, no luck

khuramraza1986 · 09-15-2013

Hi, yes they are correct. for examplea client connected to 3.0 subnet has IP 192.168.3.10 - 255.255.255.0 with Gateway 192.168.3.3 (GE 0/1 Interface IP)this client can communicate with everyone on 1.0 subnet but cant go outside. below is my sh ip rou...

Member Since	‎10-08-2012 02:32 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	7

User Statistics

User Activity

internet connection NAT

Help in Routing to Default Route

Help in Routing to Default Route

Help in Routing to Default Route

Help in Routing to Default Route

Help in Routing to Default Route

Help in Routing to Default Route