Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I configured a vMX for AWS following the AWS documentation. Spun up an EC2 instance and generated a key. It is in a security group to allow all traffic in and out but still says it has never connected. I rebooted the instance and still the same thing...
We have been having this issue for a while. Meraki has not provided a solution. Our MX device stops responding to DHCP requests. The pool is nowhere near maxed out. We have downgraded and replaced the MX, but nothing helps. We checked the device util...
I need to move APs to a site that has never had wireless. The site does not show for me to move the AP to. Is there something else I need to go to get the site to show in the option to move the APs to.
We are sending syslogs to Auvik. Auvik says none of the Cisco Catalyst 2960C 12pcL are sending logs but other cisco Catalyst models are. I do a show logging history and I see info so it is logging, just not sending it to Auvik. All the switches have ...
Sorry AI bot, most of your points were addressed in my original post. Weirdly what has helped is removing all layer 7 firewall rules even though utilization never got above 25% according to the MX. We have not had a DHCP issue since removing the laye...
I think I see what they did. It's not very clear, to me at least, just looking at the screen. It shows IPv6 only at the top but, when you go to create a rule you can do dual or IPv6. So it's not just IPv6 even though that's what it shows at the top. ...
Believe it or not, that is the reason. There turned out to be nothing wrong with the config. Auvik is just a buggy and inconstant platform. For example, traffic insights will work for a firewall on one site and not work for the exact same firewall if...
I figured it out. It has to be something in Auvik. We had interface Vlan 1 shut down for security reasons but unless Interface Vlan 1 is enabled it doesn't work in Auvik.
