Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
May I ask which N1k version you are using -- is it 4.0(4)SV1(3)? You can create a port channel with 2 dedicated pnics, and make it a trunk with just the SC and vMotion VLANs. N1k will try to distribute the veths across available PC subgroups (individ...
Hi, You don't need to configure static pinning to make use of MAC pinning i.e. you do not have to manually assign the SC and VMotion vmknics to specific uplinks. In particular, if you have a dedicated NIC for VMotion which carries only the VMotion ...
Hello, You are on the right track in considering MAC pinning with port channels. You could use static port channels as well, but that won't give you the ability to pin specific interfaces to specific uplinks.May we know why it is considered complic...
Hello, The VSM does not emit VLAN-tagged frames. Therefore, its ports need to be configured in access mode. If your Control and Packet VLANs are the same, you could use the same port profile for both.Please make sure that the access VLAN is a syst...
Hello, It is possible to have any number of vswitches coexist with the Nexus 1000V DVS on an ESX host. When you add the host to the DVS, you will be prompted to choose the uplinks for the DVS. You can choose one of the vswitch uplinks at that time....
