About Jame

Jame · 07-21-2022

Greetings colleagues I ran into the following problem, I have two local subnet, office users are in the network 192.168.15.0/24 and also have a network DMZ 192.168.90.0/24 in which there is a web server with an IP address of 192.168.90.15. 192.168.15...

Jame · 07-22-2022

I found an even simpler solution, by removing PBR and Loopback in my case it turned out to be possible to bypass the simple deny of networks in the ACL "NAT-OVERLOAD" NEW SOLUTION interface GigabitEthernet0/2.15description --- USERSencapsulation do...

Jame · 07-22-2022

Sorry, your solution really works! I am not much confused, with interface 0/2.90, you specified no ip outside although it should be inside. I am attaching a working configuration, maybe someone will need it ROUTER CONFIGinterface Loopback0description...

Jame · 07-22-2022

This solution does not work Attached the configuration.

Jame · 07-21-2022

Yes, it worked, but now users on network 192.168.15.0 cannot access the Internet

Jame · 07-21-2022

Thanks, man! I look forward to hearing from you.

Member Since	‎07-21-2022 04:36 AM
Date Last Visited	‎07-27-2022 05:00 AM
Posts	6
Total Helpful Votes Received	10

User Statistics

User Activity

Access to the external ip from the local network

Re: Access to the external ip from the local network

Re: Access to the external ip from the local network

Re: Access to the external ip from the local network

Re: Access to the external ip from the local network

Re: Access to the external ip from the local network