Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Cisco ISE 1.4 patch 6
Cisco WLC 8.0.121
setup
the WLC has an SSID called Hotspot. it uses mac auth with radius nac to redirect to the Hotspot guest portal on an ISE.
initially the flexconnect drops the users in vlan 401 (with preAuthAcl), after the ...
Had a response from TAC:
CSCva41898 not able to create NSF user/admin from CLI .. throws "% Error: Failure occurred during request."
As the workaround please create user with hash password(any) and then the same one with plain:
dkontsev-2-1-120...
check this out
http://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200492-Securing-a-flexconnect-AP-switchport-wit.html
you'll need to boot the AP on an access-port and the NEAT response from the ISE will change the ...
