Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, am simulating a customer environment in EVE. Have a come across the following network issue, I'm not sure if its a redistribution issue or if its a quirk with the EVE virtual environment I'm using to simulate the customer network.
In the diagram,...
Hi,
I have a working setup using ACE 4710 where client connections to a VIP located in client VLAN (VLAN 921) are successfully load-balancing to servers in a back-end VLAN (VLAN 804).
I have a requirement for server-initiated connections in server VL...
Hi,I'm experiencing failures with WS-X6724-SFP and WS-X6748-SFP line cards when installed in a Catalyst 6509-E with Supervisor-2T.with the following error messageOIR-6-PWRFAILURE: Module 1 is being disabled due to power convertor failureWe've tried d...
Hi,Would like some help with the following error message:SNMP: bash-3.00$ /usr/sfw/bin/snmpwalk -v2c -c <community-string> 172.17.6.224SNMPv2-SMI::mib-2 = No more variables left in this MIB View (It is past the end of the MIB tree)bash-3....
Hi, output as requested
R5#show ip ospf database external
OSPF Router with ID (10.0.0.10) (Process ID 1)
Type-5 AS External Link States
LS age: 1379Options: (No TOS-capability, DC, Upward)LS Type: AS External LinkLink State ID: 10.65.77.0 (External...
R5 sees the ping request from 301
301#ping 10.0.0.6Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.0.0.6, timeout is 2 seconds:.....Success rate is 0 percent (0/5)301#
R5#debug ip icmpICMP packet debugging is onR5#*Mar 19 14:27:4...
Hi, outputs as requested
R3#ping 10.65.77.1 source 10.0.0.5Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.65.77.1, timeout is 2 seconds:Packet sent with a source address of 10.0.0.5!!!!!Success rate is 100 percent (5/5), round-t...
