Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I would like to ask my fellow security geeks out there to assist me in determining the types and amount of non-vpn traffic going from inside to to the internet. I don't have Net Flow, and I don't have time to put a sniffer on. Is there some type so ...
I have a Pix 515e and when I do a show xlate I see the outside "destenation" IP address and the natted address with port numbers. My question is how do I correlated the natted address with port numbers to a inside users IP address?
In an typical SWAN environment, are there any technical restrictions for not running both ACS and Ciscoworks 2k (LMS 2.2) on the same server? Any thoughts pro and con would be appreciated.
Before I begin, I want to first thank everyone for their help and support. two issues: (1) I have a cat6509 the gives the following message Jan 19 23:19:35.993 PST: %ALIGN-SP-3-TRACE: -Traceback= 4085B104 40113DC4 40113DB0 00000000 00000000 0000000...
Guy's thank you for your prompt responses. I truly appreciate your help. Sniffers are great for looking that the different types of traffic but one of my requirements is bandwidth utilization for each protocol the sniffer would see. I may be wishing ...
The other responders are indeed correct. However, you can still do two different vlans on the same access port. The only to accomplish this is to have one vlan for data and the other vlan for voice. Outside of this config, you must use a trunk. Hope...
