Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Since the newest firmware upgrade, I've noticed a terrible echo on my end of my own voice through the UC320.This echo only happens when I have my extension forwarded to an external number such as my cell phone. Before you ask, I have been using this ...
Hi,I just updated the UC320. I didn't change anything else at the time, and we lost our internet connection.I have confirmed:- Modem IS working fine.-With UC320 ethernet disconnected from switch, internet works fine.- UC320 is still in route VOICE ON...
Well, after hours of netgear support, we can't get the uc320 system working properly with VLAN's. I'm going to be returning the switch next week and diving into a cisco switch.We currently have a need for 20 ports. We may soon be moving to a new buil...
Hello,My setup is as follows.DSL Modem / Router > Netgear Prosafe Switch > Computers and TelephonesI have the UC320 set to voice only topology. It's WAN is plugged directly into the modem router and it's LAN is plugged into the switch.We had this sys...
Not sure if this is even possible to include in a future release, but an anti feedback option for paging would be excellent. There are third party systems to provide this anti feedback page feature, but none of them operate off the 3.5mm page out jac...
Hi Chris,This is how it was setup and working prior to the upgrade. Now the LAN to WAN cable from the router to uc320 has been disconnected leaving me without internet on the UC but keeping the network operational.How would I get internet back on th...
Heres an update. I got the internet working once again within the network.I had to unplug the WAN on the UC320 to get it working, but this leaves me without internet on the UC.My setup.MODEM / ROUTER with 2 LAN outputs. One to the network switch SG30...
Also, to be clear, we lost internet connection on our entire network. Not just the UC320.When the UC320 is unplugged from the network, everything is fine. Plug the UC320 in and we loose our internet connection on every work station.
Hey everyone,Just an update. Got the sg300 yesterday. A night and day difference compared to the netgear. Plugged everything in and without even the push of a button all computers and ip phones automatically registered and are working excellent. Than...
Perfect,Thank you for the follow up. As an added suggestion, it would be nice if we could assign an internal extension number to access the speed dial input.That way, we can either program a soft key with the speed dial extension or on phones like th...
