Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I am having trouble to create a standard condition for Policy Authorization. Basically there are HQ and remote locations configure for guest access.Each location has its own guest vlan. On ISE the standard rule are:Standard Rule 1 if Unkn...
Hello all,I am trying to find out if possible to do the following:I have a server in the DMZ: 172.17.1.100 /24 and server in the inside 172.20.1.200 /24 both will have the same nat ipaddress outside: 1.1.1.200 this can be done using policy nat. ( I t...
Hello IronPort Expert,I ran into a problem and hope someone can give me idea how to workaround on this.Between the HQ ASA and remote office ASA, a vpn is setup but remote internet traffic does not get inspect by HQ IronPort. Is there a way to do thi...
I have a remote office and setup site to site vpn to HQ using ASA for both location. All data traffic and internet browser on the VPN link back to HQ.Everything is working fine and strange thing happened that there are 2 users can not connect to int...
I am getting problem pops up now and then from developers because they are using different applications to check, update, and code for the web base application in house. To by pass that, the no authenticaton identities is created and defined in user...
edadiosThanks again for your reponse. You are correct about the limitation of the WSA on ASA.HQ ASA has default route to next hop for internet traffic, when remote internet traffic arrives at HQ ASAit immediately go to internet without go through WS...
Edadios,Thanks for the feedback. The 2 users are on the same subnet with the rest of users at remote location and use same identity on WSA andsame access policy. That is why a bit strange for me. As soon as I get hold of user PC and do the testing ...
