Hello,I am trying to enable ssh on a vrf interface, on an ASR9K running 6.4.2 code.Following is the configuration I am testing with:A) control-plane management-plane out-of-band vrf <VRF-NAME> interface <INTERFACE-NAME> allow SSH pe...
Hi All,I wanted to confirm if Cisco is stopping its support for PBB-EVPN in favour of EVPN on ASR platform. If that is correct then what is the reason for it? From what I understand PBB-EVPN is more scalable than EVPN which makes it a better option f...
I have noticed that, it works with just specifying the loopback interface (not the physical), both with and without the vrf, specified as well:- Without VRF:control-planemanagement-planeout-of-bandinterface <LOOPBACK-INTERFACE-NAME>- With VRF:control...
Hi,I am taking it as:In-band : physical or logical interface that processes management packets, as well as data-forwarding packets.Out-of-band: an interface that allows only management protocol traffic to be forwarded or processed. Out-of-band interf...
Hi MHM,I cannot see the option of configuring a vrf under inband:RP/0/RSP0/CPU0:<device-name>(config)#control-planeRP/0/RSP0/CPU0:<device-name>(config-ctrl)#management-planeRP/0/RSP0/CPU0:<device-name>(config-mpp)#inband ?interface Configure an inban...
Hi All,Thank you for your help.I have been testing further in the lab and it seems to be that the MPP "allow" command is blocking incoming connection:control-plane management-plane out-of-band vrf <VRF-NAME> interface <INTERFACE-NAME> ...