Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 2 3650 switches in stack. i m unable to login standby stack member (switch2) using command "session" as advised in documents.
Please advise how to login standby/stack members from active switch and commands.
IOS - Denali 16.3.5 IOS versi...
Hi,
We have one router with two ISP link terminated on that router. We need to configure PfR on this router to track the performances like latency, packet drops of primary link and PfR should shift the traffic to secondary link on same router.
And ...
Guys,
i understand we can use IP SLA for failover between 2 ISP's which use static routes.
Do we have anyother possibility to achieve failover between 2 static routes more effectively than IP SLA (since ip sla doesnt give proper output if there is ...
Can you please help me with example links for configuring VRF in a router?
i have 2 ISP links terminating on same router on 2 different interafces. we need to configure VRF for each ISP and perform failover. Please help. Both are INternet links and ...
Hi,
We have a setup of 2 WAN router from different ISP's connected to one switch.
In switch:
Routes are configured as
ip route 0.0.0.0 0.0.0.0 <Router-A gateway ip> track 20
ip route 0.0.0.0 0.0.0.0 <Router-B gateway ip> 200
track 20 ip route x.x.x...
Its not working in 3650. please find output below.
Switch#session% Bad IP address or host name% Unknown command or computer name, or unable to find computer addressSwitch#Switch#Switch#session ?% Unrecognized commandSwitch#session switch2 ^% ...
Thank you.No BGP only static/default routes. How we can deploy VRF for 2 ISP's and failover? If this is a complex soln, I wish to try and deploy for learning. We can use IP sla but I need docs for VRF config for 2 ISP on same router on 2 different in...
Two routers are connected one siwtch.
my aim No LB, very simple, if ISP-1 goes down the traffic should shift to ISP-2.
Configured default routes to their respective gateways in the routers.
Switch route configuration i copied in above orignizal dis...
