Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an AIM-CUE in a 2600XM, when I telnet or access via session command, the AIM-CUE hangs before the bootloader prompt. So I can't type *** and config to download cue-installer from TFTP.Is the CF Card faulty?Is it possible to reset the AIM-CUE t...
I'm having similar problem.I deleted the vMX Azure Network from MerakiI deleted the vMZ Azure App from AzureI added them both back (same mac/serial), but new Auth Token and Azure Public IP.The Public IP works into Azure, but no connection back to Mer...
FIXED.Leaving the router on and letting the AIM-CUE endlessly retsart for 36 hours eventually made the card come up in a state that could have the CUE image loaded.
Yes, this is possible.1. You need to create a Partition/CSS.e.g. pt-plar, pt-internal in css-plar.2. create a "blank" translation pattern with the Called Party Mask set to the DN. e.g. 2000; use the pt-plar, css-plar created above.3. Add this PT/CSS ...
I used Unix DD to copy a UC500 compact flash to an AIM-CUE CF - trying to at least get to bootloader *** prompt.Unfortunately this made no difference to the "broken" aim-cue hanging at "updating flash with bootloader configuration"I tried an empty 1G...
typing "p" or "s" or "***" after the "system now booting" does nothing.A colleague pointed me at the link below.http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_2/release/notes/rncue32.htmlthe boot loader currently used might be corrupt. ...
