Has anyone integrated Qradar with CyberVision ?I have the App installed and SYSLOG configured (tcp/514 RFC3614 or Standard) on CV, logs arrive into QR but as Unknown Log Event.
I have an AIM-CUE in a 2600XM, when I telnet or access via session command, the AIM-CUE hangs before the bootloader prompt. So I can't type *** and config to download cue-installer from TFTP.Is the CF Card faulty?Is it possible to reset the AIM-CUE t...
FIXED.Leaving the router on and letting the AIM-CUE endlessly retsart for 36 hours eventually made the card come up in a state that could have the CUE image loaded.
Yes, this is possible.1. You need to create a Partition/CSS.e.g. pt-plar, pt-internal in css-plar.2. create a "blank" translation pattern with the Called Party Mask set to the DN. e.g. 2000; use the pt-plar, css-plar created above.3. Add this PT/CSS ...
I used Unix DD to copy a UC500 compact flash to an AIM-CUE CF - trying to at least get to bootloader *** prompt.Unfortunately this made no difference to the "broken" aim-cue hanging at "updating flash with bootloader configuration"I tried an empty 1G...
typing "p" or "s" or "***" after the "system now booting" does nothing.A colleague pointed me at the link below.http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_2/release/notes/rncue32.htmlthe boot loader currently used might be corrupt. ...
Thanks for your response. I'd agree with your thoughts on the CF card needing to be rebuilt, assuming the CUE card itself is ok. I understand the CUE card loads a RAM based Linux kernel from the 8mb cue-installer file (via TFTP) - once I can get back...
