Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe have an ACS 4.2 installation and we have users configured on the user setup, they authenicate using the windows database (AD). We ran failure tests and simulated AD failure but disabling the firewall rule.So the ACS server is up, AD is down. Tes...
We have a PIX 535 with unlimited lisence, it has 1,048,953 in use connections because the timeouts have been changed to 24 hour. I am addressing this issue but was wondering why its so high when the max concurrent sessions is supposed to be 500,000 a...
Error message305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.16/53305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.166/53Config:PIX Version 6.3(4)nameif ethe...
We are seeing input errors on all the interfaces that connect to our F5's.We have checked the duplex (hard set to 100 full both ends, swapped the cable and switch interface but not changed the F5 as all the interfaces have the same issue on different...
I have this already configuredaaa authentication login default group tacacs+ localbut its the ACS server that is replying with Authen failed so the switch to ACS server is not broken and will not failover to local. Its the ACS to AD thats broken. We ...
