Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,i configured dot1x on a 3750X with version 15.0.(1)SE2 but have a problem with MDA:My phone is authenticating successfully but is placed in the DATA domain instead of voice:show authentication interface gi3/0/9Client list:Interface MAC Addres...
Hi all,i know, in a common setup of an ASA i configure the inside interface as "most-trusted" with security-level 100, the outside interface with security-level 0 and my DMZ interfaces with a security-level between 1-99. I also understood that per de...
Hi,i have a problem with an ASA 5505.I have configured NAT-T for the remote access via IPSec and the cisco vpn client.My ASA loses this config option once a day.I configure NAT-T with a lifetime of 30 seconds, apply and save to flash.The next day, th...
From what i experienced, the SSID should be appended to the MAC in the Called-Station-ID attribute but seems like this is only the case if you are using a WLC.Without WLC, it can be send as a Cisco AVpair in a VSA preconditioned "radius-server vsa se...
Hi,i am authenticating with dot1x, mab might be used some day for devices not supporting 802.1X.Authentication works fine, i just wonder why the phone is placed into the DATA domain though the Radius Server returns a VSA "device-traffic-class=voice"....
Hello Julio,thanks for your comment.Good to hear i am not doing a mistake using security-level 0 on all interfaces (following the rules i mentioned) in my next setup.Best regards
