Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About georgd
Stats
Member since
03-21-2008
11
Posts
0
Helpful
0
Solutions
06-17-2010
09:48 PM
Thanks. Probably this bug CSCtc67984. http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtc67984&from=summary Question closed.
... View more
06-15-2010
10:04 PM
policy-map child class TOS1 bandwidth percent 45 policy-map parent-2 class class-default shape average 3000000 service-policy child interface Tunnel1201 bandwidth 2000 tunnel bandwidth transmit 2000 tunnel bandwidth receive 2000 qos pre-classify tunnel mode ipsec ipv4 tunnel protection ipsec profile AES service-policy output parent-2 ... sh policy-map interface tu 1201 Tunnel1201 Service-policy output: parent-2 Class-map: class-default (match-any) 3 packets, 527 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing queue limit 64 packets (queue depth/total drops/no-buffer drops) 0/0/0 (pkts output/bytes output) 3/414 shape (average) cir 3000000, bc 12000, be 12000 target shape rate 3000000 Service-policy : child Class-map: TOS1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: precedence 1 Queueing queue limit 64 packets (queue depth/total drops/no-buffer drops) 0/0/0 (pkts output/bytes output) 0/0 bandwidth 45% (540 kbps) bandwith 45%=540kbps bandwith 100%=540/45*100=1200kbps the "shape" command has no effect, if shape > 1200kbps. tunnel source gigabitEthernet 0/0.20
... View more
06-15-2010
04:03 AM
Config in Cisco3845 IOS c3845-advipservicesk9-mz.124-24.T2.bin: policy-map child class TOS1 bandwidth percent 45 policy-map parent class class-default shape average 2000000 service-policy child interface Tunnel1201 bandwidth 300 tunnel bandwidth transmit 270 tunnel bandwidth receive 270 service-policy output parent .... interface Tunnel1201 bandwidth 2000 tunnel bandwidth transmit 2000 tunnel bandwidth receive 2000 service-policy output parent .... show policy-map interface tu 1201 Tunnel1201 Service-policy output: parent Class-map: class-default (match-any) 233 packets, 103581 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing queue limit 64 packets (queue depth/total drops/no-buffer drops) 0/0/0 (pkts output/bytes output) 233/32154 shape (average) cir 1000000, bc 4000, be 4000 target shape rate 1000000 Service-policy : child Class-map: TOS1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: precedence 1 Queueing queue limit 64 packets (queue depth/total drops/no-buffer drops) 0/0/0 (pkts output/bytes output) 0/0 bandwidth 45% (540 kbps) sh policy-map interface tu 1202 Tunnel1202 Service-policy output: parent Class-map: class-default (match-any) 264 packets, 122815 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing queue limit 64 packets (queue depth/total drops/no-buffer drops) 0/0/0 (pkts output/bytes output) 264/36432 shape (average) cir 1000000, bc 4000, be 4000 target shape rate 1000000 Service-policy : child Class-map: TOS1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: precedence 1 Queueing queue limit 64 packets (queue depth/total drops/no-buffer drops) 0/0/0 (pkts output/bytes output) 0/0 bandwidth 45% (540 kbps) Qwestion: Why the same bandwith (540 kbps) on both interfaces?
... View more
- Tags:
- policy-map
- qos
- tunnel
Labels:
09-18-2009
03:05 AM
There aren't problem. Just simple read a lot of network media can help solve thus. That's all, folks! exCCNA CSCO10446747
... View more
09-18-2009
12:45 AM
Hi, guys! Nowadays, my 828 router forced down. When I look at through console to them I seen rom-message that say: "Cookie information is corrupt". Can I repair it?
... View more
Labels:
04-01-2008
05:30 AM
sh deb HWIC-SHDSL debugs: HWIC-SHDSL DSL events debugging is on HWIC-SHDSL firmware events logging debugging is on KRO-OK-2(config-controller)# dsl-group 0 pairs 0, 1 KRO-OK-2(config-controller-dsl-group)#no shut KRO-OK-2(config-controller-dsl-group)# *Mar 13 14:49:17.859: shdsl 0/0/0, grp(0), IPC msg dump: *Mar 13 14:49:17.859: 0x1 0x0 0xE 0x0 0x2 0x3 0x2 0x0 0x2 0x3 0x24 0x0 0x2 0x0 0xFF 0xFF *Mar 13 14:49:17.891: SHDSL0/0/0 FW MSG: DSM[x]: Process dsl cmd 0 chan_mask 0x9 *Mar 13 14:49:17.891: SHDSL0/0/0 FW MSG: DMT[0]: Clock Mode = 0x4 *Mar 13 14:49:17.891: SHDSL0/0/0 FW MSG: DSM[0]: Released->SetCfg tr: lincfg *Mar 13 14:49:17.891: SHDSL0/0/0 FW MSG: DMT[3]: Clock Mode = 0x4 *Mar 13 14:49:17.891: SHDSL0/0/0 FW MSG: DSM[3]: Released->SetCfg tr: lincfg *Mar 13 14:49:17.895: SHDSL0/0/0 FW MSG: CCT[00]: CCT_SHDSL_CMD_SET_CONFIG *Mar 13 14:49:17.895: SHDSL0/0/0 FW MSG: CCT[00]: CCT_SHDSL_CMD_GET_CONFIG *Mar 13 14:49:17.895: SHDSL0/0/0 FW MSG: CCT[03]: CCT_SHDSL_CMD_SET_CONFIG *Mar 13 14:49:17.895: SHDSL0/0/0 FW MSG: CCT[03]: CCT_SHDSL_CMD_GET_CONFIG *Mar 13 14:49:17.895: SHDSL0/0/0 FW MSG: CCT[00] idle *Mar 13 14:49:17.899: SHDSL0/0/0 FW MSG: CCT[03] idle *Mar 13 14:49:17.899: SHDSL0/0/0 FW MSG: DMT[0]: Rx shdsl ack set cfg, rc 0 *Mar 13 14:49:17.899: SHDSL0/0/0 FW MSG: DSM[0]: SetCfg->CfgDnld tr: ack *Mar 13 14:49:17.899: SHDSL0/0/0 FW MSG: DMT[3]: Rx shdsl ack set cfg, rc 0 *Mar 13 14:49:17.899: SHDSL0/0/0 FW MSG: DSM[3]: SetCfg->CfgDnld tr: ack *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[00]: CCT_CMD_START_CONFIG *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[00] CCT_StartConfigDownload *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[03]: CCT_CMD_START_CONFIG *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[03] CCT_StartConfigDownload *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[00] configure *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[00]: SOC16_WalkTroughTable 0 *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[00]: SDFE4_WriteConfig *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[03] configure *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[03]: SOC16_WalkTroughTable 0 *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: CCT[03]: SDFE4_WriteConfig *Mar 13 14:49:17.947: SHDSL0/0/0 FW MSG: DMT[0]: Rx ack start config, rc 0 *Mar 13 14:49:17.951: SHDSL0/0/0 FW MSG: DSM[0]: CfgDnld->CfgDnld tr: ack *Mar 13 14:49:17.951: SHDSL0/0/0 FW MSG: DMT[3]: Rx ack start config, rc 0 *Mar 13 14:49:17.951: SHDSL0/0/0 FW MSG: DSM[3]: CfgDnld->CfgDnld tr: ack *Mar 13 14:49:17.995: SHDSL0/0/0 FW MSG: CCT[00] configure *Mar 13 14:49:17.995: SHDSL0/0/0 FW MSG: CCT[00]: SOC16_WalkTroughTable 0 *Mar 13 14:49:17.995: SHDSL0/0/0 FW MSG: CCT[00]: SDFE4_WriteConfig *Mar 13 14:49:17.995: SHDSL0/0/0 FW MSG: CCT[00]: SDFE4_WriteSdiIfSettings(FOURWIRE) - if_sel = 0 *Mar 13 14:49:17.995: SHDSL0/0/0 FW MSG: CCT[03] configure *Mar 13 14:49:17.995: SHDSL0/0/0 FW MSG: CCT[03]: SOC16_WalkTroughTable 0 *Mar 13 14:49:17.999: SHDSL0/0/0 FW MSG: CCT[03]: SDFE4_WriteConfig *Mar 13 14:49:17.999: SHDSL0/0/0 FW MSG: CCT[03]: SDFE4_WriteSdiIfSettings(FOURWIRE) - if_sel = 0 *Mar 13 14:49:18.003: SHDSL0/0/0 FW MSG: CCT[00]: SCI AUX Msg 0x0002 received (len 1) *Mar 13 14:49:18.003: SHDSL0/0/0 FW MSG: CCT[00]: CCT_MSG_TUNNEL / SCI AUX *Mar 13 14:49:18.003: SHDSL0/0/0 FW MSG: CCT[00]: SCI AUX Msg 0x0002 received (len 1) *Mar 13 14:49:18.003: SHDSL0/0/0 FW MSG: CCT[00]: CCT_MSG_TUNNEL / SCI AUX
... View more
03-21-2008
02:12 AM
Hi all I have cisco 1841 router with hwic-2shdsl card. IOS c1841-advipservicesk9-mz.124-15.T3.bin I need to connect Zyxel IES-1000+SAM1008 in mode 4wired. Config on Cisco: controller SHDSL 0/0/0 dsl-group 0 pairs 0, 1 shdsl annex B shdsl rate auto Config on Zyxel (used port 3 and 4) set profile 2304B 2240 192 set port 3 2304B set port 4 2304B set nwirec 4w kassadepo 2 enable port 1 2 4 8 On Cisco: sh controller shdsl ... SHDSL wire-pair (0) is in DSL DOWN state Termination: CPE, line mode: 4-wire, Annex-B Line coding: 16-TCPAM, configured/actual rate: AUTO/0 kbps CONNECT state: MAIN_PRE_ACT, cond: GHS_TRANSFER, reason: ERR_NONE ... SHDSL wire-pair (1) is in DSL DOWN state Termination: CPE, line mode: 4-wire, Annex-B Line coding: 16-TCPAM, configured/actual rate: AUTO/0 kbps CONNECT state: MAIN_INIT, cond: NONE, reason: ERR_NONE On Zyxel: list nwire N-wire configuration: Group name Mode Group# Bundled ports -------------------------------+-------------+--------+-------------- kassadepo 4-wire STU-C group2 3-4 list ports Port Speed (Kbps) Mode Bonding PSD region State Cmax/Cmin/Act ----+---------------+---------------+--------+-----------+-------------- 3 2240/ 192/ - 4-wireC slave No annexB Disabled/Down 4 2240/ 192/ - 4-wireC master No annexB Enabled /Down Can anyone help me?
... View more
Labels:
06-17-2010
Thanks.Probably this bug
CSCtc67984.http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.d...
06-15-2010
policy-map childclass TOS1 bandwidth percent 45policy-map parent-2class
class-default shape average ...
06-15-2010
Config in Cisco3845 IOS
c3845-advipservicesk9-mz.124-24.T2.bin:policy-map child class TOS1
bandwidth...
09-18-2009
There aren't problem. Just simple read a lot of network media can help
solve thus.That's all, folks!...
09-18-2009
Hi, guys!Nowadays, my 828 router forced down.When I look at through
console to them I seen rom-messa...
04-01-2008
sh deb HWIC-SHDSL debugs: HWIC-SHDSL DSL events debugging is on
HWIC-SHDSL firmware events logging d...
Public Statistics
| Date Registered | 03-21-2008 01:51 AM |
| Date Last Visited | 08-24-2018 02:02 AM |
| Total Messages Posted | 11 |
