Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have multiple Cisco switch models in my environment, including Catalyst 9300 (Stacked), IE9320(Stacked), and IE3300 switches. All switches are currently running IOS-XE version 17.18.03.I am facing multiple issues related to SNMPv3 configurati...
Hello,I have 2 IE9320 Switch and configuration in a Stack and Port number Gig1/0/24 and G2/0/24 is connected to Palo Alto Firewall which has LACP confguration and everything is working fine. I am facing weird issue, when I power Off the active Switch...
Hello Team,I have 2 Cisco C9300-48T in a stack running IOS 17.12.4. and connect to a pair of Core Switches in Etherchannel but was facing some weird situation, suddenly switch reporting LACP suspended. I removed the interface from etherchannel and ke...
I have an complex architecture where two switches IE3300(17.12.04) are connected to each other over the trunk and the configuration is sime as belowint G1/1switchport mode trunkswitchport nonegotiate It is showing port in Broken BKN and P2p PVID* , I...
I am using Cisco Firepower with FTD 1010 Version 7.0.5, I want to implement web session timeout and ssh timeout, I just seeking help in configuring through flex connet or any other?
Hello After lot of struggle, I tried snmp-server user SNMP TEST v3 auth sha-2 256 TEST priv aes 256 TESTChanged sha-2 512 to 256 everything goes well, aftwr rebooted configuration getting retained, I am pretty sure that is a bug.
No Dynamic routing confiugration, I am using only static routes, but the interesting thing, in logs I can see that all the ports and VLANs on switch gets down and comes back immidietely.
I also Degraded the IOS Version but issue still the same. Also I have a stack of Cisco C9300 Stacked switches connected to the same firewall and same type of configuration done at palo alto side, but C9300 failover works very smoothly
Palo Alto interface are configured with AE1 interface and under that subinterface was created with VLAN 4 tag, to avoid that port connection to any other switch or bridge I enabled BPDUGUARD, do you suggest to remove this? Ports are not in err-disabl...
